Lian Li

L-Wireless Sync supported (required for use) UNIFAN interlocking system for streamlined cable management

L-Wireless Sync supported (required for use) UNIFAN interlocking system for streamlined cable management

Software controlled fan speed/ LED lighting Only one cable is required for a cluster of fans Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity 40 LEDs in each fan Quick PIN connection to provide ease of installation Low noise level at high RPM Infinity mirror look all around

Minimalistic sleek design 26.3L micro form factor chassis Side and top panels are designed with steel mesh Accommodates M-ATX and ITX motherboard with 4 slots 415mm large GPU Supports up to 360 radiator and 10 x 120mm fans Supports ATX/SFX/SFX-L and LIAN LI Edge PSU that can be mounted sideways or frontways In collaboration with DAN Cases for the case design whereas manufactured and sold by LIAN LI.

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow

Mid-tower chassis configurable for air cooling and water cooling • Airflow optimized front, top and PSU shroud side mesh panels • Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan • Supports 360 radiator at the top, front and a maximum of 10 fans • Includes rear PCIe fan bracket • Front I/O that can be relocated to the bottom • Extensive cable management solution

6”LCD at the bottom of the panel: 60Hz refresh rate, 720×1600 pixels resolution, and 500 nits brightness. M-ATX sized case with ATX compatibility Included 2 x 140mm PWM fans at the front, and 2 x 120mm PWM fans at the bottom Supports 360 radiator on the top and GPU up to 375mm long Motherboard tray position redesigned slightly lower into the PSU shroud with two bottom fans placed directly under the GPU for better cooling Well ventilated mesh panels on the front, top, and bottom, enhancing airflow Unique front PSU Installation GPU Anti-sag Bracket Included

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple configurations of fan and radiator setups to maximize the airflow.

L-Wireless Sync supported (required for use) UNIFAN interlocking system for streamlined cable management

Think Big. Build Small. O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.

Side-mounted tubing and concealed wiring for a minimal, tubeless appearance. Features a 2.1” IPS LCD with 480×480 resolution, 500-nit brightness, and 60Hz refresh rate. Offers Offline, Wireless, and Advanced USB-connected control modes. Three configurations: with TL Wireless, CL Wireless, or fanless for full DIY flexibility. Precision tubing alignment with adjustable routing for cleaner builds. Slimmed-down 360mm radiator (400×122×24mm) for enhanced case compatibility

Think Big. Build Small. O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.

3 interchangeable pump looks that can be customized with L-Connect 3 Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF Pump motor speed goes up to 3200RPM Includes a newly designed copper plate and creates straightened Liquid coolant pathway 45-degree tubing connector with tubes’ inner diameter increased to 7mm

3 interchangeable pump looks that can be customized with L-Connect 3 Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF Pump motor speed goes up to 3200RPM Includes a newly designed copper plate and creates straightened Liquid coolant pathway 45-degree tubing connector with tubes’ inner diameter increased to 7mm

he A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation

The A4-H2O is an 11-liter small form factor case, a collaboration project with DAN Cases. Based on the original DAN A4-SFX case sandwich layout concept, the A4-H2O continues the minimalist and compact form factor with improved hardware compatibility (including AIO water cooling) and simplifies installation.

The Pure White Fulfill your dream’s all-white build with a completely white chassis, down to the smallest detail. ● White Coated Mesh Panel ● Clear Tempered Glass ● Aluminum with white powder coating ● Snow White Interior ● Silver screws ● Light Grey Rubber Grommets ● White Dust Filter

Mid-tower chassis with two modes: Normal Mode/ Reverse Mode Feature multi-directional power button and movable IO module Front and side tempered glass panels for components and RGB display Supports up to 3x 360 radiators and a maximum of 10 fans Offers 9 storage drives mounting space Dual-chamber layout with hooks friendly cable management compartment Five optional accessories: Vertical GPU Kit / Upright GPU Kit / Additional I/O kit / Front Mesh Kit / Top I/O Kit

3 interchangeable pump looks that can be customized with L-Connect 3 Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF Pump motor speed goes up to 3200RPM Includes a newly designed copper plate and creates straightened Liquid coolant pathway 45-degree tubing connector with tubes’ inner diameter increased to 7mm