Networking

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km).

The MC100CM is a media converter designed to connect 100BASE-FX fiber to 100Base-TX copper and vice versa. Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed using multi-mode fiber cable with an SC-Type terminal for physical connections. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode for flexibility. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1.2 miles (2km).

Supports 802.11ac standard Simultaneous 2.4GHz 300 Mbps and 5GHz 867 Mbps connections for 1200 Mbps of total available bandwidth 4 external antennas provide stable wireless connections and optimal coverage Easy network management at your fingertips with TP-Link Tether Supports IGMP Proxy/Snooping, Bridge and Tag VLAN to optimize IPTV streaming Supports Access Point mode to create a new Wi-Fi access point

The staggered modular 24-port Patch Panels from DIGITUS® are with the 1.5 mm cold rolled c-steel perfect suitable for 483 mm (19") rack mounting. Due to the staggered array of the keystone modules a better attenuation ratio is reached between surrounding transmission channels. They are available in the colors grey (RAL 7035) and black (RAL 9005).

10" 6u Cabinet

Termination: 110-type Space saving, high-density 19'' panel design Designed to mount to any standard 19'' rack or cabinet 50µ gold-plated contacts Black electrostatic powder-coated steel Accommodates top, bottom or side cable entry Write-on designation label with clear holder on front side Rear cover with wire management bar to ensure proper patch cables bend radius and strain relief For EIA/TIA T568B/A wiring configuration

Built-in 9dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 27dBm/500mw System-level optimizations for more than 5km long range wireless transmission TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications Centralized Management System – Pharos Control AP / Client / AP Router / AP Client Router (WISP) operation modes Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Complies with IEEE 802.3ab and IEEE 802.3z Provides switch configuration of Force /Auto transfer mode for FX port Extends fiber distance up to 0.55km

One Touch Super Range Extension - Wi-Fi Clone Button simplifies your Wi-Fi configuration and helps build a seamless unified home network HomePlug AV standard providing up to 500Mbps1 high speed data transmission over a home’s existing electrical wiring, ideal for lag-free HD or 3D video streaming and online gaming Extend 300Mbps wireless connections to previously hard-to-reach areas of your home and office

Eliminate weak signal areas with whole home WiFi coverage. 2.4 GHz (300 Mbps) and 5 GHz (867 Mbps) dual-band WiFi connection ensures more stable wireless experience.† Creates a Mesh network by connecting to a OneMesh router for seamless whole-home coverage.‡ Adaptive Path Selection – connects to the fastest connection path to the router automatically and runs at top-speed. High Speed Mode – maximizes speed by using one WiFi band as dedicated backhaul, ideal for HD streaming and gaming. AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability. Smart Signal Indicator - helps to fi­nd the best location for optimal Wi-Fi coverage by showing the signal strength. Push the WPS button to easily connect to the router and you can uniformly manage from the Tether app or Web UI. Works with any Wi-Fi router or wireless access point.§

Supports 802.11ac standard Simultaneous 2.4GHz 300 Mbps and 5GHz 867 Mbps connections for 1200 Mbps of total available bandwidth* 4 external antennas and one internal antenna provide stable wireless connections and optimal coverage* Easy network management at your fingertips with the TP-Link Tether app MU-MIMO achieves 2X efficiency by communicating with up to 2 devices at once** Beamforming technology concentrates signal to your devices Supports Access Point mode to create a new WiFi access point

Up to 4 WAN 10/100 ports for multiple Internet connections. Load balancing by bandwidth distribution, by type of application, or simply failover when the main connection is disturbed1 Web interface portal authentication evaluate and authenticate all the accesses to the Internet for better access and bandwidth management Marshals bandwidth resource to specific clients based on their unique application environments

8× 10/100 Mbps RJ45 ports 4× PoE ports transfer data and power on individual cables Works with IEEE 802.3af compliant PDs Up to 250m data and power transmitting range under Extend Mode** Priority Mode ensures high priority of ports 1–2 to guarantee the quality of sensitive application Supports PoE Power up to 41 W for all PoE ports* Plug and play with no configuration required

Fast WiFi 6 - Break the gigabit barrier with speeds up to 2402 Mbps (5 GHz) + 574 Mbps (2.4 GHz). Dual Band Wireless - 2.4 GHz and 5 GHz bands for flexible connectivity. Broader Coverage - Connect to your WiFi from wherever in your home with high-gain antennas and Beamforming. Lower Latency Gameplay - OFDMA and MU-MIMO ensure the most efficient WiFi connection for your PC. Improved Security - WPA3 provides the latest security enhancements for personal password protection. SuperSpeed USB 3.0 - Up to 10x faster transfer speeds than USB 2.0,

This Delock Power supply tester is a robust voltage tester for PC-power supplies. E. g. ATX, BTX and ITX compliant power supplies can be tested. The device shows on one display all supply voltage with one decimal place. Errors will be announced by a warn signal. The power supply tester is suitable for the ambitious hobby user, as well as for a quick functional check in specialised trade.

Deco E4 is the simplest way to guarantee a strong Wi-Fi signal in every corner of your home up to 4,000 Square feet(3-pack).Wireless connections and optional Ethernet backhaul work together to link Deco units, providing even faster network speeds and truly seamless coverage.Want more coverage? Simply add another Deco.

Wi-Fi 6 Technology: Archer AX12 comes equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion. Next-Gen 1.5 Gbps Speeds: Archer AX12 dual-band router reaches even faster speeds up to 1.5 Gbps (1201 Mbps on 5 GHz band and 300 Mbps on 2.4 GHz band)15 Connect More Devices: Wi-Fi 6 technology communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.24 More Reliable Coverage: Achieve the strongest, most reliable WiFi coverage with Archer AX12 as it focuses signal strength to your devices using Beamforming technology and four antennas. Increased Battery Life: Target Wake Time technology reduces your devices' power consumption to extend their battery life.3 Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App. Backward Compatible: Archer AX12 supports all previous 802.11 standards and all WiFi devices.

4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.