Products tagged with 'ups'

The PowerWalker Modbus Card is a communication accessory that provides a pair of RJ-45 interface for remote monitoring and controlling of UPSs. It converts standard RS232 signal to RS232 signal with specified address, which allows controlling many UPSs from one computer. You can setup a desired address with jumpers (range 0-255).

AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal. Pin assignment is available in User’s Manual.

The rack-mount kit can be extended to 740 mm. The Rack-Mount Kit can be installed into server cabinets with already locked support frames. – Heavy duty rack kit up to 120kg. Suitable for the VFI 6 000 – 10 000 RMG and the VFI 6 000 – 10 000 RTG series.

The Power Walker W-Lan Module enables communication between the solar inverter and the connected smart device, e.g. a smartphone. The smart device should have a compatible APP installed to interpret the data so that the user can seamlessly monitor the solar inverter and its activities.

The WLAN Dongle is an option for the VFI ICT/ ICR IoT series to be able to connect to the internet. If the IoT UPS is not able to connect to the internet through an Ethernet Cable, the WLAN Dongle could be a viable solution. The PowerWalker VFI ICT/ ICR IoT series is the next generation UPS, offering an intuitive App for remote monitoring via the cloud. This accesory is solely for this series.

Empty Battery Pack for VFI 1000 TGS (for 6 bat, 24V). Empty Battery Pack fits inside 6pcs. 7Ah / 9Ah

Empty Battery Pack for VI 1100-1500 CW and VFI 1000 C (for 4bat, 24VDC). Empty Battery Pack fits inside 4pcs. 7Ah / 9Ah

Empty Battery Pack for VFI 1000/1500 CG (for 6bat, 36VDC). Empty Battery Pack fits inside 6pcs. 7Ah / 9Ah

EMD (environmental monitoring device) for SNMP Manager is a connectivity devices for remote monitoring of temperature and humidity. It provides dry contacts to communicate with compatible devices such as security system or alarm system.

AS/400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal. Pin assignment is available in User’s Manual. AS/400 Card for: VFI LCD, VFI C LCD, VFI RM, VFI CRM, VFI RMG, VFI CT, VFI CG, VFI CP, VFI CPG

Empty Battery Pack for VFI 2000/3000 CG (for 6bat, 72VDC). Empty Battery Pack fits inside 6pcs. 7Ah / 9Ah

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit). It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads. It is rated up to 3000VA.

The PowerWalker BMS Card is an accessory for the LiFe Battery System. It provides communication between the LiFe Battery System and the connected equipment:

Battery Pack Housing for VFI 1000-1500 ICT IoT Model

Empty Battery Pack for VI 1000 RLP (for 4bat., 24VDC). Empty Battery Pack fits inside 4pcs. 9Ah.

Empty Battery Pack for VI 2000 RLP (for 8bat., 48VDC). Empty Battery Pack fits inside 8pcs. 9Ah.

Empty Battery Pack for VFI 1000 CRM LCD (for 4 bat, 24VDC). Empty Battery Pack fits inside: 4 pcs. 12V / 9Ah