Powerwalker

Model: IEC Cable 10A C13/C14 (180cm) 0,75mm² SKU: 91010013 Additional power cable

Model: IEC Cable 10A C13/C20 (180cm) SKU: 91010041 Additional power cable

Converter cable from IEC C14 to Type F (CEE7/3). 20cm with 3×0.75mm2 wires

PowerWalker UK Input Power Cable C19 (180cm)

IEC Cable

Typical applications are routers and switches, signal amplifiers and repeaters, POE systems, access points, security systems, smart home control panels, VoIP phones, IP cameras, modems, decoders, media players, medical monitors and many other 12VDC (max. 25W) devices. Nominal load 12W constant. Maximum load/overload capacity up to 25W using coaxial DC connector (OD 5.5mm / ID 2.5mm).

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Long lasting and affordable

Like to go to the outdoors? camping trips, fishing trips, and even road trips! Your devices will never die as you can charge them with the sun!

Protect your devices in case of a power outage

The PowerWalker Basic VI 650/850/1000 SB series is designed to answer the essential market needs. This line interactive UPS will protect your load from power failures and voltage disturbances, while remaining affordable and compact. It is equipped with a USB port with HID support allowing easy and immediate communication with any O/S

Rack Kit for 1-3KVA 19" UPS - Art-No 10120529

The rack-mount kit can be extended to 740mm. This enables to install the rackmount kit into server cabinets with already locked support frames. This kit is also suitable for server cabinet up to 1200mm depth with middle support frame

The rack-mount kit can be extended to 915mm. This enables to install the rack- mount kit into server cabinets with already locked support frames. This kit is also suitable for server cabinet up to 1200mm depth with middle support frame.

Provides contact closure for monitoring UPS Offer different dry-contacts Suitable for IBM server, Personal PC and workstationsequipment’s, auto-controlled industrial equipment andcommunication applications. AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal with max 1A. Pin assignment is available in User’s Manual. AS400 Card for: VI RT

The rack-mount kit can be extended to 738mm. This enables to install the rack- mount kit into server cabinets with already locked support frames. This kit is also suitable for server cabinet up to 1200mm depth with middle support frame.

Protect your devices in case of a power outage