Ups Accessories

Model: IEC Cable 10A C13/C14 (180cm) 0,75mm² SKU: 91010013 Additional power cable

Model: IEC Cable 10A C13/C20 (180cm) SKU: 91010041 Additional power cable

Converter cable from IEC C14 to Type F (CEE7/3). 20cm with 3×0.75mm2 wires

IEC Cable

Typical applications are routers and switches, signal amplifiers and repeaters, POE systems, access points, security systems, smart home control panels, VoIP phones, IP cameras, modems, decoders, media players, medical monitors and many other 12VDC (max. 25W) devices. Nominal load 12W constant. Maximum load/overload capacity up to 25W using coaxial DC connector (OD 5.5mm / ID 2.5mm).

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Rack Kit for 1-3KVA 19" UPS - Art-No 10120529

The rack-mount kit can be extended to 740mm. This enables to install the rackmount kit into server cabinets with already locked support frames. This kit is also suitable for server cabinet up to 1200mm depth with middle support frame

The rack-mount kit can be extended to 915mm. This enables to install the rack- mount kit into server cabinets with already locked support frames. This kit is also suitable for server cabinet up to 1200mm depth with middle support frame.

Provides contact closure for monitoring UPS Offer different dry-contacts Suitable for IBM server, Personal PC and workstationsequipment’s, auto-controlled industrial equipment andcommunication applications. AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal with max 1A. Pin assignment is available in User’s Manual. AS400 Card for: VI RT

The rack-mount kit can be extended to 738mm. This enables to install the rack- mount kit into server cabinets with already locked support frames. This kit is also suitable for server cabinet up to 1200mm depth with middle support frame.

AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal. Pin assignment is available in User’s Manual.

The PowerWalker Smart PoE UPS is a compact device, specifically designed to protect your PoE camera from connection loss. It is powered and charged by a single PoE line (data + power), allowing for installation directly next to the camera. With the PowerWalker Smart PoE UPS, you essentially turn any PoE camera with storage capacity into a security network with its own backup system.

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit). It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads. It is rated up to 3000VA.

Battery Cabinet.Dimensions 450x470x320mmfits 2x100Ah, 2x65Ah, 4x40Ah, 4x26Ah, 10x17Ah