Products tagged with 'ups'

Model: IEC Cable 10A C13/C14 (180cm) 0,75mm² SKU: 91010013 Additional power cable

Model: IEC Cable 10A C13/C20 (180cm) SKU: 91010041 Additional power cable

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Battery Pack cable for VFI TGB and VFI TGS Series. Please manually verify voltage rating of the UPS, cable and Battery Pack to avoid shorting different voltages.

Provides contact closure for monitoring UPS Offer different dry-contacts Suitable for IBM server, Personal PC and workstationsequipment’s, auto-controlled industrial equipment andcommunication applications. AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal with max 1A. Pin assignment is available in User’s Manual. AS400 Card for: VI RT

Battery Cabinet.Dimensions 435x210x270mmfits 1x100Ah, 1x65Ah, 2x40Ah, 3x26Ah, 5x17Ah

AS400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS. It is frequently used along with PLCs and signal control panels. Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On. Using AS/400 it possible to shutdown UPS remotely. Solution requires external 12V/24VDC source for a high signal. Pin assignment is available in User’s Manual.

The PowerWalker Smart PoE UPS is a compact device, specifically designed to protect your PoE camera from connection loss. It is powered and charged by a single PoE line (data + power), allowing for installation directly next to the camera. With the PowerWalker Smart PoE UPS, you essentially turn any PoE camera with storage capacity into a security network with its own backup system.

An external Maintenance Bypass Switch with function of a PDU (Power Distribution Unit). It provides continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. As a PDU it allows to distribute the power among several loads. It is rated up to 3000VA.

Battery Cabinet.Dimensions 450x470x320mmfits 2x100Ah, 2x65Ah, 4x40Ah, 4x26Ah, 10x17Ah

The PowerWalker Modbus Card is a communication accessory that provides a pair of RJ-45 interface for remote monitoring and controlling of UPSs. It converts standard RS232 signal to RS232 signal with specified address, which allows controlling many UPSs from one computer. You can setup a desired address with jumpers (range 0-255). Modbus Card for: VFI T, VFI RT, VFI PRT, VFI TCP, VFI TP 3/1, VFI 6000-10000 TGB/TGS/RTG/RTGS

PowerWalker PDU LC-16A IEC is designed to distribute AC power from a single source to 10 outputs with metering of the total current flow.Dimensions are 483 x 68 x 44mm 1,5kg

The rack-mount kit can be extended to 1100mm. The Rack-Mount Kit can be installed into server cabinets with already locked support frames. – Extendable up to 1100mm- Suitable for VFI 1000-3000 RM, VFI 1000-3000 RMG, VFI 1000-3000 CRM, VFI 1000-3000 CRS, VFI 1000 R/1U

PowerWalker PDU LC-10A is designed to distribute AC power from a single source to 10 outputs with metering of the total current flow.

Battery Cabinet.Dimensions 585x470x320mmfits 3x100Ah, 3x65Ah, 6x40Ah, 6x26Ah, 14x17Ah

Empty Battery Pack for VFI 1000 AT (for 4bat., 24VDC). Empty Battery Pack fits inside 4pcs. 9Ah.